Sunday, January 19, 2014

Why You Need To Consult Stucco Inspection Knoxville TN Technicians

By Marissa Velazquez


Properties constructed using this material may suffer from water intrusion especially inside the cladding system. You need to consult stucco inspection Knoxville TN technicians to investigate the exterior of your home and areas behind the cladding system. In building construction practices, stucco is a material that is used for exterior finishing and cladding. This material is applied in form of a plaster, and this is done in two or even three coatings over the masonry works.

Although the material can last for long with little maintenance, this is so if only installed correctly. In the past decades, the materials used to make stucco might have failed to meet the required standards for long survival of surfaces. When this problem is coupled with substandard building practices, these could be some of the causes of troubles being experienced in building constructed using this material like water intrusion.

The low maintenance practices make it an ideal material for homeowners who are concerned about maintenance costs. Using stucco offers an elegant exterior finish for your building, and when installed properly, it will last for long. This building material provides a good cladding system as long as any construction defects and damages are restored in time, and the surfaces maintained properly.

But as many cladding systems will suffer from problems like leakages, the same can occur with this material. With this construction material, maintenance is of paramount importance. Maintenance of stucco cladding or siding systems is one thing, which makes it different from other forms of materials used in the cladding system or exterior finishes. Areas such as sealant joints provide the first line of defense on your property from water intrusion.

Penetrating the surface will show the amount of moisture trapped inside. Infrared cameras and scanners may be used as non-invasive techniques to inspect your premises. However, these are not adequate to provide precise results and other methods are needed. Following the non-destructive inspections, an intrusive probe is needed to be able to determine the amount of moisture inside the walls.

The areas behind the stucco material are not easily visible, which means that they cannot be inspected visually without creating holes on the surfaces. Because the investigation of the quality of a house can be difficult, you need to seek the services of a primed contractor who understands all the details in inspecting buildings. Depending on the suspected nature of damage, there may be a number of inspections.

If you are doing some modifications or installations of equipments like satellite dish, penetrations on surfaces should be sealed properly. If you are adding shutters and new cables, plumbing systems, wiring, or security systems, the penetration areas of the material should be sealed using quality. Renovations and other modifications like roof replacement require that the surface be investigated properly. This will ensure adequate waterproofing within the critical details.

In this process, the doorframes and windows are checked. Investigation is done on exposed edges and surface sweeps to check for proper caulking and installation practices. With skilled and experienced stucco inspection Knoxville TN technicians, you can thoroughly investigate the conditions of your premises and get solutions to problems like water intrusion and defects like cracks or splits within the cladding system.




About the Author:



0 comments:

Post a Comment